Please can you people on DIY network stop calling a Canadian made Screw a "Square drive screw", it's called a "Roberson screw"
As a cabinet maker, I'm offended at the misuse, and misrepresentation of this screw.
It might seem funny to you, and you may say "it's just a screw" but as I said it's misrepresentation, and it seems as though the "American" side of DIY network is really trying to take away the Canadian achievement of a far superior screw head.
edit - grammarThis message has been edited. Last edited by: GenericDerek,
An example, the Phillips head screw is called a Phillips head screw on DIY network, not a "cross drive" or "X drive", so why is a Roberson head screw called a "Square drive"?
You'll have to yell not only at DIY but everyone else in the U. S. of A. In the US, they are referred to as 'Square Drive" screws. In fact, I've never heard the name "Robertson" pertaining to a screw.
If you ask for square drive screws, you get square drive screws. The packages say square drive on the front. It's just what they are down here in the states. I just checked a couple of different boxes of square drives from different manufacturers. They all say square drive, the name Robertson cannot be found anywhere.
One of the guys on my crew is a professional cabinet maker - has been for years. He calls them square drives too.
We have slotted screws, Phillips head screws, Square drive and Star drive. Odds are you go to another country and you'll find yet more names for them.This message has been edited. Last edited by: Jaybee,
To add: A cross drive or X drive is different than a Phillips head. An X drive is like two slotted indents, only set in an X pattern while a Phillips has depth in the center of the X. A Phillips screwdriver will not fit into an X drive screw.
I can't say I've ever heard them called Roberson screw either. And I suspect while a Canadian named Roberson may have come up with the design the vast majority sold in the USA and Canada are made in China not Canada.
Oh and most of the shows on HGTV US and DIY come out of Canada today anyway.
Any advice given here is general in nature and is not necessarily valid for your given area. If in doubt check with your local codes enforcement department for what is required when doing electrical, plumbing or structural work on your house. Permits may or may not be required in your area and home owners may not be able to DIY some tasks. I have no way of knowing if you have the skills needed to complete the tasks you are asking about, when in doubt seek professional assistance.
My advice may be worth exactly what you pay me for it. :-) For the record I did not stay in a Holiday Inn Express last night.
I don't think Mr.Roberson really cares what his screws are called, so long as the royalty checks keep coming
Actually, according to the OP's link, the "square socket" drive screw was patented four years before Robertson was even born. Rather than invent it, Robertson perfected a method of manufacturing that made it more practical to produce the square drive screw.
And yes, the manufacturing rights were sold to China long ago.
I could not agree more. Never heard the name Robertson applied to what we always called a Square #1 or #2. I too am offended.
"What would Curley do ?"
and once again, Frearson and Shepherdson fasteners are left out of the discussion. discrimination, I tell ya, discrimination!
(no, I can't find a use for those things, either)
sig: if this is a new economy, how come they still want my old-fashioned money?
Friend of mine worked for Fleetwood Motorhomes and the tips and bits were called "Indiana" and in calling the home office for more...
"What would Curley do ?"
For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.