I posted on the other HGTV board, but maybe some of you here can help?
On our South windows (original to the late 50's house)we have a sill board that sits on the brick & has nearly all the paint peeled off clean to the raw wood. The rest of the exterior window frame (sides and top) has paint intact and looks fine. We had these painted about 4 years ago.
This is the area that is always exposed to sun/weather. The wood is extremely dry, but not spongey nor rotted. What do you think is the best prep after scraping/sanding? Would a liquid wood hardener be good to use, prior to a primer? What type of primer is best in your experience?
(Linseed oil, was the old cure for dry wood prior to a coat of oil primer)
Any suggestions or experience with this type of an issue? Thanks!
Best thing I can think of is Kilz. But I'm not a painter, I do it only under duress.
Any advice given here is general in nature and is not necessarily valid for your given area. If in doubt check with your local codes enforcement department for what is required when doing electrical, plumbing or structural work on your house. Permits may or may not be required in your area and home owners may not be able to DIY some tasks. I have no way of knowing if you have the skills needed to complete the tasks you are asking about, when in doubt seek professional assistance.
My advice may be worth exactly what you pay me for it. :-) For the record I did not stay in a Holiday Inn Express last night.
I talked to the DH of a good friend yesterday who does all kinds of building/remodeling and wood working. He suggested just sanding the bare wood smooth, and painting on Linseed oil (diluted with 2 parts thinner) on the wood, and allowing it to soak in/dry for several days. Then use an oil base primer (I think I still have some solvent based white Kilz in a small can).
Will give that a shot anyway.
For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.