DIY Network

All Projects

TV Projects

    What Do You Want To Work On?

      What Activity Do You Want To Do?

        0

        Available Projects

        Get Results

        DIY Network /

        Message Boards

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Outdoor Projects    Outdoor Tilted Lamp Posts. Need advice to make straight.
        Go
        New
        Find
        Notify
        Tools
        Reply
          
        Outdoor Tilted Lamp Posts. Need advice to make straight. Sign In/Join 
        posted
        My mom purchased about 6 outdoor lamp posts from Lowes and had a contractor come and install them roughly 2 years ago. I believe ever since the installation the lamps where never vertically straight and It is not because of the cemented bases where the post goes in. The base was done right and is balanced. The problem lies within the lamp posts it-self.

        The Lamp post has two halves. the bottom half is securely bolted in the base where the top half is loosely connected to the bottom half. the material of the lamp posts seem to be made of some graphite plastic.

        Can anyone help me figure out a way to straighten the lamps.
         
        Posts: 1 | Registered: Sep 18, 2013Reply With QuoteReport This Post
        Picture of Jaybee
        posted Hide Post
        Any chance you can link to the Lowe's site or take a pic?


        Jaybee
         
        Posts: 10428 | Location: Knoxville, Tennessee | Registered: Sep 27, 2003Reply With QuoteReport This Post
        Picture of Frodo
        posted Hide Post
        as jaybee suggested..you got a picture? knda hard to give you an answer. without seeing the problem...just a shot from the hip....straighten the top half of the post and drill and screw....but...cant see

         
        Posts: 4058 | Location: I live in southern mississippi | Registered: Jun 01, 2008Reply With QuoteReport This Post
        posted Hide Post
        hack fix: drive a couple stakes in the ground (like 4 feet of 1x2 with points cut on the ends), dig around the bases, pull/push the post vertical as low as you can reach, tie the posts off with ropes to the stakes, and then fill in around the base, stomp the dirt down, water it, and repeat. leave it sit for a couple days, and remove the stakes and ropes. it might stay right over the years, it might not. the posts, not being metal, are going to be easily dented from too much muscle, so watch it. DO NOT DIG on the wiring side, you'll cut the wires.

        proper fix: redo the job. use a post level or tape two 3-foot levels to the post to get them right, stake off with 3 or 4 ropes and stakes when they're right, and pour new bases from sack mix. yes, this means probably tossing what you have. the posts should be sunk at least a foot and the concrete at least that deep around them.

        This message has been edited. Last edited by: swschrad,


        sig: if this is a new economy, how come they still want my old-fashioned money?
         
        Posts: 5820 | Location: North Burbs, MN | Registered: Mar 14, 2007Reply With QuoteReport This Post
        Picture of CommonwealthSparky
        posted Hide Post
        Frodo is onto something with his reply. Most modern fencing systems already have that as part of the set up. Maybe the light post does as well.


        Popeye only reached for the Spinach can as a last resort...
         
        Posts: 1535 | Location: Central Pennsylvania | Registered: Jun 02, 2010Reply With QuoteReport This Post
          Powered by Social Strata  
         

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Outdoor Projects    Outdoor Tilted Lamp Posts. Need advice to make straight.

        © Scripps Networks 2009

        Advertisement

        Posting Guidelines

        • Please be sure posts are category appropriate.
        • No off-topic or off-color postings.
        • Postings may be deleted at the discretion of DIY moderators.
        • No advertising is allowed.
        • Be nice. No name calling, personal attacks or flaming.
        • Certain words will trigger moderation of the post. These words mostly cover political or religious topics, which are OFF the topics covered by DIY.

        Full Guidelines

        For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.