I have 2 questions here:
1. After I cleaned out the fireplace to remodel this, my burner seems weaker on one side (the closer pipe) in Picture 1. Is this normal or should I do something (clean or throw away)? I turned this fireplace on like 1-2 times/year.
2. I want to use some sort of glass rocks like FireCrystals from HomeDepot. Should I just fill inside the burner like Picture 2 (I found from internet)? Or should I fill the whole fireplace, which costs more? I just want to understand whether there is heat benefit of having a lot of rocks or not.
picture 1 one gas holes stopped up with trash,/ unadjusted air mix, buy smoe pipe cleansers, or a bit of wire and poke in the gas holes, then take the burner off and blow it out.the holes are stopped up. also, there is an air vent adjustment door on the burner....open/close bit to get a pretty blue flame after cleaningThis message has been edited. Last edited by: Frodo,
correct flame image
@Frodo thanks for the advice.
Any suggestion on my second question regarding fire rocks?
no comment on the rocks, thats a personal decision,,, looks good to me either way..
i like the red glow with ceramic wood logs over it
ck out a product called rock wool insulation....sold at fireplace stores for big bucks, for a little bag orf it or go to a big box store and get a huge chunk for 10 bucks.
click hereThis message has been edited. Last edited by: Frodo,
Maybe I start with little glass rocks and see if the heat is ok.
What do I use the rock wool insulation for around fireplace? Are you talking about inserting around the door?