DIY Network

All Projects

TV Projects

    What Do You Want To Work On?

      What Activity Do You Want To Do?

        0

        Available Projects

        Get Results

        DIY Network /

        Message Boards

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  General Home Improvement    removal of a wall??
        Go
        New
        Find
        Notify
        Tools
        Reply
          
        removal of a wall?? Sign In/Join 
        posted
        I live in a classic raised ranch home. My attic is a fink truss. I bought this house as a bank property but through my research am trying to figure some stuff out. The ex owner I know swapped the kitchen and dining. Why I dont know but I want to re open as I think the area in my picture that is marked with the red x was already open. I am almost positive this is half a dummy wall as all my neighbors have the classic design. Also I dont even think this wall is load as above is a fink truss attic. When I pulled the floor molding I can also see where the wood floor continues under what seems the dummy wall. Thanks much!
        [IMG]http://img.photobucket.com/albums/v222/masterlegend/Ideanote_20130302_135450_01.jpg[/IMG]

        This message has been edited. Last edited by: MasterLegend,

         
        Posts: 3 | Location: nj | Registered: Mar 16, 2013Reply With QuoteReport This Post
        posted Hide Post
        Neighbors house. You can see the original design. The opening left to the kitchen is my archway now while the redbox I drew above on my picture is open in my neighbors to the original dining area.

         
        Posts: 3 | Location: nj | Registered: Mar 16, 2013Reply With QuoteReport This Post
        Picture of Jaybee
        posted Hide Post
        99 times out of 100 my advice for structural issues is to get somebody local to take a first-hand look as what you have.

        However, you have two major clues indicating that this is not a load-bearing wall:

        1. Typically, ranchers with truss roof framing rely on the two exterior and one central interior wall for support. That means that the roof load bearing walls are running longways with the house. As the wall you want to remove runs from front to back, it is likely to not be a bearing wall.

        2. The finished floor. This is the definitive clue - if you have a finished floor running underneath the bottom sill of the wall in question, then this wall was added in at a later time as a remodel. As such, it can be removed.

        This message has been edited. Last edited by: Jaybee,


        Jaybee
         
        Posts: 9077 | Location: Knoxville, Tennessee | Registered: Sep 27, 2003Reply With QuoteReport This Post
        posted Hide Post
        The wall runs side to side in the house. Front to back the span is about 28ft. It seems they tiled all accross the kitchen to dining room swapped tge gas line over to the side of the original dining are to make a u shaoed kitchen and have eat in on the left where the arch is. The attic has a w shaoed fink truss. I just dnt know why they would have done this its just wierd. Closes everything off so I want to reopen this area to put a island open to the living.
         
        Posts: 3 | Location: nj | Registered: Mar 16, 2013Reply With QuoteReport This Post
        Picture of Jaybee
        posted Hide Post
        Different people like different things. The bottom line is that if this wall was added as a remodel then it can also be removed.


        Jaybee
         
        Posts: 9077 | Location: Knoxville, Tennessee | Registered: Sep 27, 2003Reply With QuoteReport This Post
          Powered by Social Strata  
         

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  General Home Improvement    removal of a wall??

        © Scripps Networks 2009

        Advertisement

        Posting Guidelines

        • Please be sure posts are category appropriate.
        • No off-topic or off-color postings.
        • Postings may be deleted at the discretion of DIY moderators.
        • No advertising is allowed.
        • Be nice. No name calling, personal attacks or flaming.
        • Certain words will trigger moderation of the post. These words mostly cover political or religious topics, which are OFF the topics covered by DIY.

        Full Guidelines

        For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.