DIY Network

All Projects

TV Projects

    What Do You Want To Work On?

      What Activity Do You Want To Do?

        0

        Available Projects

        Get Results

        DIY Network /

        Message Boards

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  General Home Improvement    Screen porch plywood fastening
        Go
        New
        Find
        Notify
        Tools
        Reply
          
        Screen porch plywood fastening Sign In/Join 
        posted
        We are thinking about putting plywood over our screened porch windows to preserve the screens. We figure we need 8 pieces of plywood and for less than 200 dollars (wood and hardware) we can build screen covers that can be easily installed and uninstalled and add years to our screens life.

        We don't want to screw the plywood into the framing (pressure treated 6x6 posts and some 2x6 members) because we'd have lots of exposed screw holes in our wood after a few years. I was trying to think of a way to fasten the plywood to the frame with a fastener that could just stay on the porch ( when the plywood was removed) and not look too bad. I was thinking barrel bolts where only the bolt receiver would be installed on the frame (4 per frame), And the plywood would be flush with the front side of the frame so the barrell bolt would work. I was also thinking l-brackets mounted to the frame but that would mean the plywood would have to be cut smaller to wiggle it inside the l brackets. Is there any other kind of specially fastener that could be mounted permanently to the window frame, where the plywood could be set in place and the fastener "turned" to secure the plywood?

        We don't need hurricane protection, just wind and snow protection for the screens , so these dont need to be too beefy. We also want to make it economical, easy to install/uninstall, and not too ugly
         
        Posts: 215 | Location: Toronto, Canada | Registered: Feb 22, 2004Reply With QuoteReport This Post
        Picture of Jaybee
        posted Hide Post
        I was trying to figure out the "protect the screens" thing, then I saw where you live.

        First question: Are your screens fiberglass or aluminum. If they are aluminum, then even years of snow should not be a problem. If they are fiberglass, then spend a little money to change them out to aluminum.

        I really thing just using a good aluminum screen is the way to go. Even if the screens do get stretched out every few years, your best bang for the buck will be just to replace the screens as needed.

        Just using plywood without some kind of frame will warp - you'll likely only get one or maybe two seasons out of it. Plus, you have the "how to attach the plywood without it looking crappy' problem. Add in where do you store the plywood in the off season and I don't think that making solid covers is a good idea.

        When I started reading your post, my first though was to just get some plexiglass. This would not only cover your screens but would extend the season of your porch a little. But plexi is expensive and in your cold environment, pretty brittle.

        Unless I'm missing something, I don't see why aluminum screens will be a problem.


        Jaybee
         
        Posts: 10300 | Location: Knoxville, Tennessee | Registered: Sep 27, 2003Reply With QuoteReport This Post
        Picture of Frodo
        posted Hide Post
        watch video
        bonus video

        these work really well, how to video

        This message has been edited. Last edited by: Frodo,


        https://www.youtube.com/*****?v=vn7bkncf1_E
         
        Posts: 3843 | Location: I live in southern mississippi | Registered: Jun 01, 2008Reply With QuoteReport This Post
        Picture of GardenSprite
        posted Hide Post
        Were you at Woodstock, Frodo? Are you one of the celebrants in the video?

        I remember Woodstock and the folk concerts. Interesting times.
         
        Posts: 1903 | Registered: Oct 06, 2006Reply With QuoteReport This Post
          Powered by Social Strata  
         

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  General Home Improvement    Screen porch plywood fastening

        © Scripps Networks 2009

        Advertisement

        Posting Guidelines

        • Please be sure posts are category appropriate.
        • No off-topic or off-color postings.
        • Postings may be deleted at the discretion of DIY moderators.
        • No advertising is allowed.
        • Be nice. No name calling, personal attacks or flaming.
        • Certain words will trigger moderation of the post. These words mostly cover political or religious topics, which are OFF the topics covered by DIY.

        Full Guidelines

        For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.