I was needing some help. I am building a podium stand but want to make it mobile by adding wheels to it. I am not sure on the best way to add them to the stand. Should I add a larger base to it and how do I know what size wheels to get. Also do I put them so far in from the edges. If anyone knows it has any advice on how to do this I would appreciate it.
How wide is the base of your podium?
I would go with some furniture casters that can be locked placed out towards the edges of the podium. Here is a commercial site that might help you decide on the size and type.
Any advice given here is general in nature and is not necessarily valid for your given area. If in doubt check with your local codes enforcement department for what is required when doing electrical, plumbing or structural work on your house. Permits may or may not be required in your area and home owners may not be able to DIY some tasks. I have no way of knowing if you have the skills needed to complete the tasks you are asking about, when in doubt seek professional assistance.
My advice may be worth exactly what you pay me for it. :-) For the record I did not stay in a Holiday Inn Express last night.
you give the wheels a lovely gift bag and introduce them to the crowd :-D
Sparky's got the answer, although since these things get banged about a bit over floor transitions and humped into place in storage rooms, I would add a second layer of plywood, screwed and glued, to the bottom of the podium before attaching the wheels. instead of screws, I would put Teenuts into the podium shelf and bolt the wheels into the Teenuts.
then you are not going to knock the wheels off. I've seen a few of these, and in real life, at least one caster is barely hanging on, like that One Wheel on a grocery cart.
sig: if this is a new economy, how come they still want my old-fashioned money?
For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.