DIY Message Boards
how to cut safety glass

This topic can be found at:
http://boards.diynetwork.com/eve/forums/a/tpc/f/9221916776/m/6543967577

Dec 07, 2013, 05:01 PM
Frodo
how to cut safety glass
my moms house has a florida room,
i believe the glass is safety glass...i want to cut out a square in the door for a cat door. but was told you can not cut safety glass...
is that true? can it be cut?

the squares you see are bugular bars, not part of the glass

This message has been edited. Last edited by: Frodo,


Dec 07, 2013, 06:00 PM
Jaybee
Nope, you can't cut it. Any safety glass that has holes or cut-outs will have those done first, then it will be tempered into safety glass. Once it's tempered it cannot be cut or drilled again.


Jaybee
Dec 07, 2013, 06:44 PM
Frodo
not the answer i wanted...but is the answer i expected.....thank you very mucho

no door for the kitty....
just have to keep getting up and do as i am told
every time he meows....spoiled cat!
Dec 07, 2013, 08:07 PM
Conrad
You could always cut a hole in the wall?
But I would have an electronic catch on it (with a key collar for the cat), so just the cat could go in and out. Or else it is liable to attract other small animals that she may not want inside.
Dec 07, 2013, 08:24 PM
Frodo
like this guy?


Dec 07, 2013, 08:27 PM
Jaybee
I can't tell from the pic but are there any sliding doors? If so, there is a full-height door panel that's about 1' wide that contains a pet door.

Installing in the wall is a good idea too, provided you have any wall space.


Jaybee
Dec 08, 2013, 01:07 AM
Frodo
no wall space , the room is glass
except the inside corner.