Jan 03, 2014, 08:42 PMMike B83
Non-combustible chase sheathing???
I'm putting in a wood stove and the chimney will run up the side of my house on the exterior. I'm going to build a chase around it and I was wondering if anyone can recommend a non combustible sheathing to cover the chase with? The siding will be finished with stucco.
I'm contemplating using steel studs and maybe GP Durock Next Gen board and then covering it with stucco. Would this work of should I just stick with 2x4 DF studs and OSB ply wood. The chase will be 18"x 30" with 3.5" of clearance front and back from studs and 11" on the sides.
Jan 03, 2014, 09:36 PMJaybee
Put a little money into installing a lined flue and then you'll have no worries. Even with just a single walled flue your chase size is large enough so that even combustible material like wood studs and OSB sheathing will be OK.
Other options will be to use Hardibacker as your sheathing ans base for stucco, install a fire resistant drywall on the interior of the chase or a combination of all of those.
Bottom line though is that if you correctly install a regular flue your chase is large enough so that you can make it out of almost anything. Anything beyond that is just there for giving you peace of mind.
Jan 03, 2014, 09:58 PMMike B83
My class A factory made chimney pipe is double wall Duravent Duratech 6". It has 2" clearances for combustibles.