i am installing replacement windows inoutside wall on enclosed porch (double hung vinyl) i got a good deal on 4 new, i want to install as if they are new construction minus the installation fins found on new construction windows. i would like to know any tips or tiricks to do the installatio, just a note i will be vinyl siding the outside afterwards, any ideas would be helpful thanks jim
What is your reason for not wanting to use the nailing fins?
On vinyl windows, the nailing fins are how you attach them. Since you are going to be installing new vinyl siding later anyway, there is no reason not to use the fins. If you got the correct windows (those made to go with vinyl siding) then you will notice that the vinyl "brick molding" that is a part of the window already has a recessed groove. This groove is were the vinyl siding will fit so that it is trimmed out.
Installation is simple: Align the window in the RO, nail in place through the fins, add your siding.
I too have a doubt in installing replacement vinyl windows. Is that necessary to replace the inside moldings(tops) along with others or can we use the existing?
Christy, please go back and add your own post.
It gets way to confusing trying to ansewer two differant peoples questions at the same time.
I agree 100% with the other poster.
Other then you got a "deal" why would you do it that way?
Using a real new constrution window with the built in J moulding is by far the best and easyest way.
Second would be new constrution with a nailing fin.
Third would be a replacement window and have the outside trim wraped in coil stock.
If I understand your idea, correctly that window is far more likly to leak.
Not just guessing here, many times I've seen where customers tryed to save money and bought used, replacement, or wrong sized window and tryed to make them work.
Most end up have to spend far more for all the repairs needed because of water getting in.
New replacement windows usually come with nailing fins which you need to use as an outer surface especially if you plan to have vinyl siding installed eventually. Any particular reason why you don’t want to use the nailing fin? It'll actually help to anchor the windows firmly in place.This message has been edited. Last edited by: DIYAdmin2,
James I suggest you go go back and edit your post to read "new constrution windows" not new replacement windows.
Replacement windows do not have nailing fins. They come with flat jambs so they can be installed inside the old jambs.
Joe, good retort!
"jameswilson7" is just another incarnation of the recent plague of spammers - no wonder he doesn't understand the technical issues of windows. Anyone who checks his posts can see the similarity of language and "style" of posting, as well as the attempt to bring forward old posts which have already been answered.
I still wonder why the Admins don't delete these posts?
frankly, I think they have one site admin, who is not, how do I say this, really working from home.
sig: if this is a new economy, how come they still want my old-fashioned money?
Have you replaced windows yourself before? If not, I might do some research on a professional installation company. Seeing as you already have the windows they can't try to upsell you. If you are in the Northeast I would check out NEWPRO windows. They did our replacements last winter and it was a job very well done.
For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.