DIY Network

All Projects

TV Projects

    What Do You Want To Work On?

      What Activity Do You Want To Do?

        0

        Available Projects

        Get Results

        DIY Network /

        Message Boards

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Floors    Repair lifting tile over concrete
        Go
        New
        Find
        Notify
        Tools
        Reply
          
        Repair lifting tile over concrete Sign In/Join 
        posted
        I have ceramic tile throughout. Tiles in the hallway are lifting over a crack in the concrete slab. This only happens in the summer months, they settle down in the other seasons. Question: What do I use to seal the crack in the slab? What do I use to re-adhere the tiles after repairing the slab?


        The only thing to fear, is fear itself.
         
        Posts: 1 | Location: Tucson, AZ | Registered: Aug 11, 2013Reply With QuoteReport This Post
        Picture of Jaybee
        posted Hide Post
        Depending on how much movement there is in the slab, it may or may not be able to be fixed. Even if it can be fixed, all the tile has to go first.

        You need to isolate the movement of the slab from the tile. This means adding an additional backer layer between the tile and the slab. A backer board that spans over the crack that is attached to the slab with thinset may keep the slab movement from transmitting through to the tile. Of course to do this all the tile must be set on the new backer layer - meaning that all the tile must be removed and reinstalled. And, if the slab is moving a lot even adding the isolation layer backerboard may not be enough.

        An alternate method would be to get a slab jacker in to pump concrete under the slab. This will actually be a better fix as it will stop the original problem - the slab moving with seasonal changes. That is, if it works. While there is a good chance that it will fix the problem, there are no guarantees. However, with slab jacking you would only need to remove a few tiles so that holes could be drilled through the slab to pump the concrete. Those tiles could then be replaced.


        Jaybee
         
        Posts: 10141 | Location: Knoxville, Tennessee | Registered: Sep 27, 2003Reply With QuoteReport This Post
          Powered by Social Strata  
         

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Floors    Repair lifting tile over concrete

        © Scripps Networks 2009

        Advertisement

        Posting Guidelines

        • Please be sure posts are category appropriate.
        • No off-topic or off-color postings.
        • Postings may be deleted at the discretion of DIY moderators.
        • No advertising is allowed.
        • Be nice. No name calling, personal attacks or flaming.
        • Certain words will trigger moderation of the post. These words mostly cover political or religious topics, which are OFF the topics covered by DIY.

        Full Guidelines

        For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.