DIY Network

All Projects

TV Projects

    What Do You Want To Work On?

      What Activity Do You Want To Do?

        0

        Available Projects

        Get Results

        DIY Network /

        Message Boards

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Floors    Assistance level subfloor low point as much as 1 1/4"
        Go
        New
        Find
        Notify
        Tools
        Reply
          
        Assistance level subfloor low point as much as 1 1/4" Sign In/Join 
        posted
        We are trying to put hardwood flooring in our living room, 450 sq ft. We removed current flooring to level out subfloor. The subfloor is composed of wooden planks with small gaps in between them. The house is about 50 years old and the subfloor has high and low spots. The deepest point is about 1 1/4" from the highest point which we will be leveling the floor from.

        What is the best material to use to level the floor?

        The lowest point is towards an edge that's about 15 ft in length.

        Your advice is greatly appreciated.

        Thank you
         
        Posts: 1 | Registered: May 18, 2013Reply With QuoteReport This Post
        Picture of Jaybee
        posted Hide Post
        The best 'material' is actually more of a method. You have uneven floor joists and/or support beams that need to be leveled out. This will require some jacking with a large hydraulic jack and shimming - possibly adding in some extra support columns and beams to carry the load on the places that need to be jacked up.

        Once you get the floor framing level then you can skin over the existing planked subfloor with a layer of plywood. From there you can install your new floor.

        You can take out minor dips in the floor by filling in the low spots with layers of roofing, felt or vinyl - or by using a floor leveling compound. Then cover over the repaired subfloor planks with plywood. While this method does work it's only for minor changes and cannot handle a 1-1/4" dip.


        Jaybee
         
        Posts: 10137 | Location: Knoxville, Tennessee | Registered: Sep 27, 2003Reply With QuoteReport This Post
        posted Hide Post
        Based on your description of the subfloor, I suspect that the house is a little more than 50 years old. During that time it is likely that places have "settled." Jaybee is right about jacking up the support beams. When you do so you might put cracks in the wall, which may be plaster rather than drywall. You can minimize cracking by jacking up slowly, over a period of days.
         
        Posts: 994 | Location: Alabama | Registered: Sep 28, 2003Reply With QuoteReport This Post
          Powered by Social Strata  
         

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Floors    Assistance level subfloor low point as much as 1 1/4"

        © Scripps Networks 2009

        Advertisement

        Posting Guidelines

        • Please be sure posts are category appropriate.
        • No off-topic or off-color postings.
        • Postings may be deleted at the discretion of DIY moderators.
        • No advertising is allowed.
        • Be nice. No name calling, personal attacks or flaming.
        • Certain words will trigger moderation of the post. These words mostly cover political or religious topics, which are OFF the topics covered by DIY.

        Full Guidelines

        For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.