We removed carpet and there is space for the laminate floor to fit under the trim on the floor. I really don't want to remove it and the wood fits under the space (I'm guessing). Do I still need spacers and if so where do I put them? I'm confused!
Thanks so much!
The spacers are just a convenience to use during installation. Any spacers used will have to be removed when the floor is finished anyway. So yes, go ahead and keep the base in place and install the floor. Just make sure that you are leaving a space between the edge of the floating floor and the wall.
For best results, end the floor flush with the face of the base trim. You will be adding a shoe mold piece anyway so this will cover an additional 3/8" of so of the floor.
I too like the look of base shoe, as in many moulding small profiles its name also describes its function. Dread seeing quarter round install in its place.
Popeye only reached for the Spinach can as a last resort...
The one challenge when installing flooring with the baseboard already in place is keeping the floor from sliding under the trim and eliminating your expansion space. You don't want the floor tight against the wall or it will buckle with the seasonal changes.
Any advice given here is general in nature and is not necessarily valid for your given area. If in doubt check with your local codes enforcement department for what is required when doing electrical, plumbing or structural work on your house. Permits may or may not be required in your area and home owners may not be able to DIY some tasks. I have no way of knowing if you have the skills needed to complete the tasks you are asking about, when in doubt seek professional assistance.
My advice may be worth exactly what you pay me for it. :-) For the record I did not stay in a Holiday Inn Express last night.
For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.