I have bought new pine boards for interior basement stairs.
I want high gloss clear look do I use polyurethane or
is there something else I use for them.
Thanks LindaThis message has been edited. Last edited by: eyeliner66,
Boards is a pretty generic term.
Not trying to cause an issue but just concerned that you bought the right materials before sealing with any thing.
Real pine treads are thicker, and not just one piece of wood. There laminated strips of wood to reduce cupping.
There also rounded on the edge that over hangs.
Poly made for floors is what you need. The more coats the longer it's going to last.
http://www.homedepot.com/p/Unb...-048-HD00L/202087175This message has been edited. Last edited by: joecaption,
This did not answer my question! they are step boards that lowe's sell they are real thick they are the right boards there step boards.
Go with a high gloss poly designed for floor use. All will tend to yellow a little with age but the water based versions will stay clear longer. Just make sure whatever you use is rated for floor service.
THANKS! Jaybee yOU Answered my question again.I was hoping you would read my question cause you have replyed to all my question on different boards, and you reply to the question, and not something that has nothing to do with what I ask.Thanks again Linda
For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.