I have carpet in the downstairs hallway and ceramic tile in the downstairs bathroom. There's a brass metal trim that edges the carpet. As a glaring testimony to my minimal skills, there is a slightly uneven gap between the tile in the bathroom and the brass metal trim in the hallway: about 1/4" wide on the left and 1/2" wide on the right. I would like to install a wood transition strip to cover that gap. My understanding is that I should drill 3 or 4 quarter-inch holes appropriately spaced in the gap (which means drilling into the slab), glue a piece of dowel into each hole, then hammer a finishing nail through the wood transition piece and into the dowel. I'm not at all happy about the idea of drilling into the slab. Is that really the best way to do it? How deep to drill?
Glue it. A good two part epoxy will do the trick, will cure fast and will not expand. Gorilla glue is also more than strong enough but you'll want to carefully tape on either side of the work as it will expand as it cures.
Agreed, glue it. You can also use construction adhesive. But whatever you use, clean the slab area real well so the glue grabs onto the slab, and not a bunch of dust or dirt that never got cleaned
They make it look so easy on tv, don't they
Just my opinion..
I wouldn't glue the wood, maybe a polished marble or limestone threshold that closely matches your tiles and has the right bevels. They also come in solid colors.
I've glued 6 transition strips using PL Premium. Worked fine. I used canned food to hold the strips down over night.
For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.