Looking for ideas on what's wrong from anyone who knows appliances. I installed a used gas range in my house, which I had at my previous house. At my old house, we had no low flames, now the burners wont get high. They are loud, flickery and seem to want to blow out at times. I cannot even boil water without putting a lid on the pot. There are no kinks or leaks in the line. Is it possible the line is too small? Any other possible solutions? Thanks.
If that doesn't solve it, then I would have to ask if you are using the same kind of gas, or did you switch gas -- propane to natural or vice versa.
And if your gas line is too small depends on how long of a run the pipes are; and if there is any other appliances pulling gas off that run. The farther the run, the larger the pipe needed. Building Departments generally have 'plumbing' requirements to guide you.
Posts: 696 | Location: No. California | Registered: Mar 24, 2004
Please tell me that's a typo, 1/4"? Not even close to the right size. Most would use at least 3/8. There's also suppost to be a pressure reducer. One of the many reasons it's suggest to get a permit or at least have the gas company or a plumber hook gas up.
Posts: 17734 | Location: Hartfield VA | Registered: Jan 31, 2004
You are looking for ideas for Gas Ranges. You may go with Goedeker's for best brand deals in kitchen appliances. You may get better option for Gas Ranges in different variety and also in best quality. Thanks so much for the post.
Luckster8, you are going to have to call a gas-licensed plumber to run the correct line to that stove. 1/4 inch is what is used in small camper trailers, and it is nowhere near sufficient for a modern home appliance. it is actually dangerous to have the stove on that pretend gas line.
sig: if this is a new economy, how come they still want my old-fashioned money?
Posts: 4689 | Location: North Burbs, MN | Registered: Mar 14, 2007