Where can I get a new, 3.5 to 5 gpf toilet? Even googling didn't help. Thanks,
dig deep in the landfill, and glue the parts from one back together. it's the law that you can't install one any more, so they don't make 'em. went out of stock years ago. the folks tried chasing them something around 15 years ago after a low-flow unit didn't work for them, and they got lucky and found one at the wholesaler buried behind a bunch of slow movers.
you might, might, be able to get one at a plumbing salvage store.
your other option, assuming you have iron drain pipe that doesn't flow smoothly and clogs, is to replace it down to the (usually) clay or PVC outfall to the street. ABS or PVC, according to the codes in your area, are both fine for the purpose and allow the low-flow units to work. this is usually permit work, and being DWV which has multiple hazards if done badly, requires certification of skill. usually this means a journeyman or higher plumbing license in the real world. could get 2nd-mortgage costly.
if the old pipe was installed correctly with the right slope and all, a plumber might be able to razor the existing pipe clean enough to work, at least for a while, with a power auger.
there is something called a power-assist toilet which basically stores energy from the last flush, and uses it to boost the flush, or uses a pressure bypass from the water line. assault-weapon toilet? they are higher priced, discuss your issues with a knowledgeable licensed plumber working as an apron at the home center, if you can find one of them, or with your regular plumber. I bet it's a special-order item from the wholesale house.This message has been edited. Last edited by: swschrad,
sig: if this is a new economy, how come they still want my old-fashioned money?
Are they not available in Canada ? For some reason I though they were...
"What would Curley do ?"
I recall seeing a dual flush toilet on one of the DIY programs - might have been TOH. There were low and full flush options, depending on the need.
I suspect something like this might have been a European invention.
At any rate, it seems to be the best of both worlds, assuming it works as represented.
For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.