DIY Network

All Projects

TV Projects

    What Do You Want To Work On?

      What Activity Do You Want To Do?

        0

        Available Projects

        Get Results

        DIY Network /

        Message Boards

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Bathroom    New Tub and Surround Install
        Go
        New
        Find
        Notify
        Tools
        Reply
          
        New Tub and Surround Install Sign In/Join 
        posted
        I'm installing a new fiberglass tub and acrylic surround. Do I need to install greenboard from the ceiling to floor or can the tub and surround be installed with nothing behind it?
         
        Posts: 2 | Registered: Jun 25, 2012Reply With QuoteReport This Post
        Picture of Jaybee
        posted Hide Post
        Most fiberglass units attach directly to the studs. The surround edges are designed so that your drywall will overlap the edge flange.

        Some of the cheaper surround versions have a very thin surround material. This style is attached to some form of backing sheathing - greenboard, concrete backer etc.

        In either case, the instructions with the unit or on-line instructions will tell you what to do.


        Jaybee
         
        Posts: 9068 | Location: Knoxville, Tennessee | Registered: Sep 27, 2003Reply With QuoteReport This Post
        posted Hide Post
        Thanks for the info. The surround appears to be cheap because it does not have any flanges, so I'll have to use greenboard to glue it down. Since this is the case, would you recommend going ahead and using a 4x8 sheet of greenboard or should I only run the sheetrock down to the tub flange?
         
        Posts: 2 | Registered: Jun 25, 2012Reply With QuoteReport This Post
        Picture of Jaybee
        posted Hide Post
        At a minimum, I would use greenboard in all areas behind the surround. Continue the greenboard past the edge of the surround for the full length of the greenboard, then change to regular drywall.

        However, I would prefer to use Hardibacker as the backing material instead of greenboard. Hardi will not be affected by moisture while the greenboard can still be destroyed by a small leak over time. Greenboard is still drywall and can turn to mush if exposed to water. The only downsides to Hardi would be that it will take more mudding effort to make the exposed areas not covered by the surround as smooth as the remaining drywall and the fact that Hardi will cost about twice as much for the same area.


        Jaybee
         
        Posts: 9068 | Location: Knoxville, Tennessee | Registered: Sep 27, 2003Reply With QuoteReport This Post
        Picture of Conrad
        posted Hide Post
        Consider loosely packing the voids of the underside of the tub with fiberglass batt insulation prior to seating the tub. It helps to muffle sounds and keeps the water a bit more insulated for those longer soaks.
        I have heard it can be a good idea to fill the voids in the corner shelving with the expanding foam. (Make sure it is safe for the plastics) It helps make them feel and sound more solid and also a bit stronger.
         
        Posts: 6632 | Location: Plains and Mountains | Registered: Sep 26, 2003Reply With QuoteReport This Post
        Picture of CommonwealthSparky
        posted Hide Post
        I have seen the underside spray foamed as well.


        "Why isn't everyday Earth Day ?"
         
        Posts: 921 | Location: Central Pennsylvania | Registered: Jun 02, 2010Reply With QuoteReport This Post
          Powered by Social Strata  
         

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Bathroom    New Tub and Surround Install

        © Scripps Networks 2009

        Advertisement

        Posting Guidelines

        • Please be sure posts are category appropriate.
        • No off-topic or off-color postings.
        • Postings may be deleted at the discretion of DIY moderators.
        • No advertising is allowed.
        • Be nice. No name calling, personal attacks or flaming.
        • Certain words will trigger moderation of the post. These words mostly cover political or religious topics, which are OFF the topics covered by DIY.

        Full Guidelines

        For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.