DIY Network

All Projects

TV Projects

    What Do You Want To Work On?

      What Activity Do You Want To Do?

        0

        Available Projects

        Get Results

        DIY Network /

        Message Boards

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Bathroom    Bathroom remodel
        Go
        New
        Find
        Notify
        Tools
        Reply
          
        Bathroom remodel Sign In/Join 
        posted
        Having a tub liner and surround installed (by contractor) and plan on re-doing the rest of the bathroom myself. I know my current floor has several layers and will need to stripped down to a new subfloor. Don't think there will be an issue there. My walls currently have what I think is called MARLITE paneling. Assuming these panels were glued to the existing walls, when these panels come off, pretty sure it's going to tear up the wall underneath, so will probably have to be replaced. That being said, if I want to end up with just painted walls,should I use regular drywall or use a cement board or similar material? Any help is appreciated. thanx.

        This message has been edited. Last edited by: Stan G,


        stan grafinski


        Bathroom - wall paneling
         
        Posts: 5 | Registered: Feb 02, 2014Reply With QuoteReport This Post
        Picture of joecaption
        posted Hide Post
        Kind of doing this backwards.
        Should have been redo all the walls then have the enclosure installed, now you stuck having to work around them and dealing with a seam on the outside edges.
        Depends on your local codes. In my area you have to use a moisture resistant wallboard.
        Unless your tiling there is no need for cement board.
        What you have to do depends on how bad the wall is when that junk is removed.
        I find it a lot easier in most cases to just rip it all down and start over.


        joecaption
         
        Posts: 18046 | Location: Hartfield VA | Registered: Jan 31, 2004Reply With QuoteReport This Post
        posted Hide Post
        Thanx for the reply. Guess I should've been clearer in the description. Haven't started anything yet. Contractor is waiting on me to finish my part before he does the install. Your suggestion was what I was expecting to do, just wanted some verification.


        stan grafinski
         
        Posts: 5 | Registered: Feb 02, 2014Reply With QuoteReport This Post
        Picture of joecaption
        posted Hide Post
        If it was mine I'd be installing a nail on not a glued on enclosure.
        It gets installed directly to the studs and the sheet rocks installed around it.
        It's going to be about 3 times a thick and look and feel much better.
        No need for a contractor if you know how to pound a nail and drill a hole with a hole saw.


        joecaption
         
        Posts: 18046 | Location: Hartfield VA | Registered: Jan 31, 2004Reply With QuoteReport This Post
        posted Hide Post
        Unfortunately, that part of the decision was taken out of my hands, if you catch my drift. My preference was to retile the tub/shower. However...


        stan grafinski
         
        Posts: 5 | Registered: Feb 02, 2014Reply With QuoteReport This Post
          Powered by Social Strata  
         

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Bathroom    Bathroom remodel

        © Scripps Networks 2009

        Advertisement

        Posting Guidelines

        • Please be sure posts are category appropriate.
        • No off-topic or off-color postings.
        • Postings may be deleted at the discretion of DIY moderators.
        • No advertising is allowed.
        • Be nice. No name calling, personal attacks or flaming.
        • Certain words will trigger moderation of the post. These words mostly cover political or religious topics, which are OFF the topics covered by DIY.

        Full Guidelines

        For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.