DIY Message Boards
Re-assembling a Framed Shower Door

This topic can be found at:
http://boards.diynetwork.com/eve/forums/a/tpc/f/6191013504/m/3333914177

Jun 17, 2013, 11:33 PM
AeroAg07
Re-assembling a Framed Shower Door
So I decided to take apart my framed shower stall to give the frame a new finish. The finish turned out great, but I'm having issues with some of the re-assembly. Most of it appears trivial, but the shower door itself has proved otherwise. I cannot get the channel in the door-frame pieces to wrap onto the rubber gasket/glass. It is a very tight fit, and it was certainly difficult when I removed the door-frame pieces. Any suggestion or tricks to this? Any help is appreciated.

Thanks,
David
Jun 18, 2013, 04:45 PM
nona
I'm not really sure of what you're saying, but if it's a problem getting something in or on a seal, try using liquid soap as a lubricant
Jun 19, 2013, 12:02 AM
AeroAg07
I bought some Vaseline and it worked great.