DIY Network

I saw this a while back and I'm try to find the design plans for it, So I was wondering if any one can point me in the right direction. The project was the assembly table as seen on this page Assembly Table
FIGURE C

You can go to David Marks website and purchase the plans. http://www.djmarks.com/

Don

This message has been edited. Last edited by: Indiana Don,

Hi SnapShot,

Having viewed the site link in your last post I have not found any plans for the well-organized wall storage unit as viewed in Figure C. However, by view previous Figures I determined that it happens to be in David Marks' workshop located in Sonoma County, California.

At the bottom of the link you provided was a link to his own web site which I went to and have included the link below which may be of interest to you. On his own site is a link to his Contact page whereby you may email him and ask if plans for that unit are available. The link for this is also below.

David Mark's Home Page:
http://www.djmarks.com/channels/djmnews.asp

His Hyperlinks Page:
http://www.djmarks.com/links.asp

Hi Contact Page:
http://www.djmarks.com/contact2.asp

Also on the link you provided at the bottom of the page were additional links. In particular was a link to WEB EXTRA: WORKSHOP TOUR -- SHOP LAYOUT the link is below.

http://www.diynetwork.com/diy/ww_shop/article/0,2049,DIY_14445_2278324,00.html

This link provides a detailed layout of this workshop on this page. There is also a link to a pdf file which provides a diagram of the layout which is below.

http://www.diynetwork.com/DIY/mmo/WWK-413/wwk413_shoplayout.pdf

From these two you are interested in the Storage areas labelled #27 on the diagram and there are several in his workshop.

In addition on the link listing this layout at the bottom under Resources is a link to a book you may be interested in and order. It is entitled:
How to Design and Build Your Ideal Woodshop
Model: 1558704817
Author: Bill Stankus
Popular Woodworking Books

It also states the following:
David Marks Website
David Marks, DIY's Wood Works host, is a master woodworker. For more information on cut sizes and project details, please contact him via his Website at www.djmarks.com. The links I have already included above.

Hope this is of some help.

Good Luck!

that is called a torsion box
David Marks has a whole episode devoted and is on the best how to about a TB

Thank you all for the responses. It was exactly what I was looking for.

Unfortunately, I followed the links and he does not have plans available for this torsion box.

It was worth a shot though.

try googleing around "torsion box:
and Ian Kirby he is another wood worker who has written about a TB

I went ahead and did a little more searching and found it on the DIY site. I just started looking for "Torsion Box" instead of "table"

Torsion Box links at the bottom

Yep that's the one I was talking about
I yield to your superior googleing skills

YOU DA MAN