DIY Message Boards
router for kreg table

This topic can be found at:
http://boards.diynetwork.com/eve/forums/a/tpc/f/5721916776/m/4873927477

Oct 22, 2013, 05:37 PM
mcfangz
router for kreg table
i just purchased a kreg router table and have to mount the base of my craftsman 2 hp router to the insert. well, needless to say i wrestled with to get the "body" free from the base. router hasn't been used in a couple of years. is there a lubricant that could be used before putting back together ie: white lithium spray grease or graphite powder?
Oct 22, 2013, 08:05 PM
nona
any grease or or graphite can transfer to the workpiece. Instead, try an unmedicated talcum powder. If any get on the work , it's easy to remove