DIY Network

All Projects

TV Projects

    What Do You Want To Work On?

      What Activity Do You Want To Do?

        0

        Available Projects

        Get Results

        DIY Network /

        Message Boards

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Electrical    CFL lights pulsating in one fixture only
        Go
        New
        Find
        Notify
        Tools
        Reply
          
        CFL lights pulsating in one fixture only Sign In/Join 
        posted
        Hi folks.

        I recently had a light fixture + ceiling fan replaced. I had a handyman do the installation. He is not a licensed electrician, but has a lot more experience doing this sort of work than I do.

        The new fixture has candelabra sockets, so we didn't use the bulbs from the old ceiling fan. It came with three incandescent bulbs, so we used those. However, after under a month, all 3 new bulbs had burned out.

        I didn't know why the burned out, but thought perhaps bulbs included for free with a light fixture might be especially low quality - no big deal.

        I had one CFL with the candelabra screw size so I used it, but my wife complained it pulsated when she turned it on - made her feel like she was "in a dance club."

        So I bought two new bulbs - also CFLs. When I tried them, I found they pulsated very badly. Probably turning on/off about once a second

        So I ultimately moved the new CFL bulbs to a bathroom fixture with the same sockets, and moved the bathroom's incandescents up to the ceiling fan's fixture.

        The brand new CFLs worked fine in the bathroom, and the incandescents appeared to work fine in the ceiling fan.

        But now I'm concerned that the ceiling fan's light fixture has something wrong with it -- that it is somehow interfering with the current flow, which results in CFLs to pulsate and causes incandescents to be unusually stressed to the point of burning out prematurely.

        I suppose my theory will be proven within a month if the ceiling fan's incandescent bulbs also burn out.

        I can tell you that all light fixtures in the house are on one 15A circuit, and I have never had a problem with pulsating light before.

        I would like to know if these observations ring a bell with anybody - if this is something anyone has seen before and whether there is an easy explanation.

        I know ultimately the answer is to have the light fixture and wiring inspected by a licensed electrician. But I would like to at least try understanding the problem first.

        Thank you,

        Allan Carhart
         
        Posts: 1 | Registered: Nov 20, 2013Reply With QuoteReport This Post
        Picture of CommonwealthSparky
        posted Hide Post
        Since you have a handle on your possible problem you also hold the key to fix the problem. If you feel confident in your abilities try this. Turn the power off on that circuit. Drop the cover that hides the wiring at the box holding the fixture in place. Remove each wire nut, inspect the wiring and the carefully make up the connections. Stranded wire pigtailed to solid copper improperly could be the culprit. Good luck.


        Popeye only reached for the Spinach can as a last resort...
         
        Posts: 1440 | Location: Central Pennsylvania | Registered: Jun 02, 2010Reply With QuoteReport This Post
        Picture of Jaybee
        posted Hide Post
        Any chance that there is a dimmer switch on that fan light circuit?


        Jaybee
         
        Posts: 10312 | Location: Knoxville, Tennessee | Registered: Sep 27, 2003Reply With QuoteReport This Post
        posted Hide Post
        CFLs don't like being in an enclosed space, the ballast circuit (cheap electronics) overheat and funny things happen. we have had horrible results with CFL candelabra bulbs, and long ago sent them all to recycling.

        candelabra filament bulbs don't fare much better, they get hot, very hot. touch one with a damp rag and they shatter.

        my solution is to not use them in any sort of enclosed space. if your fan assembly does not have room for standard Edison sockets in replacement, try and get LED bulbs. otherwise, install a different bathroom fan. IMPHO weasels saw you coming when the put that unit on the market.


        sig: if this is a new economy, how come they still want my old-fashioned money?
         
        Posts: 5734 | Location: North Burbs, MN | Registered: Mar 14, 2007Reply With QuoteReport This Post
          Powered by Social Strata  
         

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Electrical    CFL lights pulsating in one fixture only

        © Scripps Networks 2009

        Advertisement

        Posting Guidelines

        • Please be sure posts are category appropriate.
        • No off-topic or off-color postings.
        • Postings may be deleted at the discretion of DIY moderators.
        • No advertising is allowed.
        • Be nice. No name calling, personal attacks or flaming.
        • Certain words will trigger moderation of the post. These words mostly cover political or religious topics, which are OFF the topics covered by DIY.

        Full Guidelines

        For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.