DIY Message Boards
Creative room divider with pocket door

This topic can be found at:
http://boards.diynetwork.com/eve/forums/a/tpc/f/4291013504/m/8563982577

Nov 16, 2013, 09:27 PM
Maine2013
Creative room divider with pocket door
We are building a room divider/half wall and want to use a glass pocket door on its'side. Door would slide down into pocket; leaving top portion open between the two rooms-allowing air circulation and view between rooms. Stowed door would be in the half-wall. We've seen this while we were living in Germany so we know it's possible but what kind of pulley/lowering/raising system would anyone recommend? Any comments or thoughts would be appreciated! Thanks!
Nov 17, 2013, 12:23 AM
Jaybee
What you want are called linear actuators. Many, many styles and sizes available to custom fit whatever you want to lift. These could be hidden inside the half wall and raise the door panel when you want to divide the room.

Some here: http://www.firgelliauto.com/ but Google "linear actuator" for other choices.


Jaybee
Nov 17, 2013, 01:46 PM
nona
linear actuators would be best, but if they are too pricey for you, you could use a pulley system as is used on venetian blinds