DIY Network

All Projects

TV Projects

    What Do You Want To Work On?

      What Activity Do You Want To Do?

        0

        Available Projects

        Get Results

        DIY Network /

        Message Boards

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Remodeling    stair bullnose
        Go
        New
        Find
        Notify
        Tools
        Reply
          
        stair bullnose Sign In/Join 
        posted
        Hello,
        Thanks for all your help in advance

        Currently we are redoing our stairs. They were initially open stairs that were completely carpeted with iron balusters

        We wanted to close them up and use false treads on both ends of each real tread, then place carpet in the middle that would end up being flush with the false treads

        Due to the nature of the stairs the risers needed to be in the front of the real treads and thus the tread could not overhang the new riser. There is a squared edge as seen in the pic

        Our thought was to add a bullnose piece to the end of squared edge so that carpet would be able to flow over. I was told by the carpet guy that we cannot add this piece as it is likely to break. What he would like to do is place 1/2" plywood on top of the riser (thus making it flush with the false treads on the size) that would overhand the tread and then put carpet on top. This would mean that the carpet would not be flush with the false treads but be thicker (possibly an inch when accounting for the padding)

        Other people have told us that with glue and nails that bullnose piece will not possibly break. Certainly they sell bullnose additional pieces for this very reason I think. So the questions are, can we use these pieces and will they hold up over time.

        If any one has any suggestions or experience with this, your help would be much appreciated.
         
        Posts: 1 | Registered: Jan 26, 2014Reply With QuoteReport This Post
        posted Hide Post
        quote:
        Originally posted by darthvuder:



        There is a squared edge as seen in the pic







        Where's the beef? Or the pic, in this case.
         
        Posts: 984 | Location: No. California | Registered: Mar 24, 2004Reply With QuoteReport This Post
        Picture of Jaybee
        posted Hide Post
        Given perfectly fitted tread edge and bullnose edge and a good way to tightly clamp the bullnose piece on, it would have a good chance of staying there.

        Now, if you hired me to come in and do this, I would say no - because even in a perfect fit it is very possible that the bullnose would break off. There is a LOT of force put on that part of the stair tread - over and over again.

        It almost sounds like your best method would be to replace the treads entirely with a good, finished tread, then install your carpet runner down the middle. That's the typical method.


        Jaybee
         
        Posts: 10452 | Location: Knoxville, Tennessee | Registered: Sep 27, 2003Reply With QuoteReport This Post
          Powered by Social Strata  
         

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Remodeling    stair bullnose

        © Scripps Networks 2009

        Advertisement

        Posting Guidelines

        • Please be sure posts are category appropriate.
        • No off-topic or off-color postings.
        • Postings may be deleted at the discretion of DIY moderators.
        • No advertising is allowed.
        • Be nice. No name calling, personal attacks or flaming.
        • Certain words will trigger moderation of the post. These words mostly cover political or religious topics, which are OFF the topics covered by DIY.

        Full Guidelines

        For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.