I am remodeling the fireplace to make it look like this
I want to change the brick color tiles. But should I completely dig and pull them out or can I just lay the new tiles on top of it? See red circle in the photo. I don't mind the bottom to be a bit taller than the carpet.This message has been edited. Last edited by: quanghoc,
Any thought here folks?
Thanks in advance
There is no reason why you cannot overlay over the existing floor tile. There are a couple of things to consider though:
1. If you are installing a larger sized hearth, then the perimeter of the existing tile is a potential crack area. With two different subfloor surfaces under your new tile, there will be different expansion issues going on.
2. Similar thing - you'll likely have a height difference between the existing tile and the subfloor next to it. If your new material will extend out past the existing you may have to build up the subfloor around the old tile perimeter.
3. Have you tried to remove the old tile? For a small, flat section like this, they usually pop up fairly easily. A hammer and chisel from the side does the trick. Once the old tile is gone you are no longer concerned with the tile edge issue.
Jaybee, thanks for the advise. I was just thinking of a lazy way but I guess pulling it may as well be worth the time.
For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.