I want to put a metal roof on my house but it has a double pitch roof. It is a 6/12 pitch starting at the eaves. But once you are half way to the peak it changes to 8/12 pitch. How would I do the transition? Another tricky part is there are dormers. One on the north side of the peak and one on the south side of the peak. Both have aluminum siding.
Tips? Tricks? Advice?
*Hiring someone is a last resort. I prefer to do as much as I can myself since I'm not shy to learn or try.
Here's a pic of the outside of the house from the north. If you zoom you can see there is a slight pitch change in the roof.
I couldn't even begin to answer your question but just wanted to say that your house is really, really lovely. It looks like a Craftsman, with some variations. Is that a full length screened-in porch in front? Those arches are beautiful.
Doing to roofing and ceiling by an expert or DIY then you must do it on your own nicely. That's how we do it.
What type metal roof are you planning on?
Want a roof that should last about 75 to 100 years then consider standing seam.
Best part about them is there is no visible fasteners to leak.
It would take a pro roofer to install one but it's wroth it.
Way to many expansive specialized tools needed that would never get used again by a DIY.
For some reason your pictures would not come up for me even with three reloads.
I'm not getting them either Joe.
Any advice given here is general in nature and is not necessarily valid for your given area. If in doubt check with your local codes enforcement department for what is required when doing electrical, plumbing or structural work on your house. Permits may or may not be required in your area and home owners may not be able to DIY some tasks. I have no way of knowing if you have the skills needed to complete the tasks you are asking about, when in doubt seek professional assistance.
My advice may be worth exactly what you pay me for it. :-) For the record I did not stay in a Holiday Inn Express last night.
Joe and Sparky,
What happens when you try to access the photo?
Does this work for you?
I'm not a metal roofer and never want to be.
But any time I've seen a bungalow like that done it's done in two separate sections.
All the shingles will need to come off. If not the metal will expand and contract and wear off the protective coating.
Going to have to add some Ice spikes to keep from having and ice slide.
I still would hire a pro on this one.
Just not a big fan of exposed fasteners that a DIY would use.
As the metal expands and contracts and the UV breaks down the rubber washers break done it will leak.
For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.