I recently replaced the motor assembly on my GE Model number GSD2600G00WW dishwasher with the universal replacement motor WD26X10013.
The motor is running, the water is filling, but the drain is not draining. The gate arm mechanism opens and closes, but the basin only drains a very little bit. There was a separate bag of parts for a turbidity sensor, which I could not find on my machine.
I would contact GE and ask to speak with their tech support..since you used a non GE OEM part, get ready to get some grief...if you do, call the place where you ordered the part and see if they can help you.
Also, do you have an electrical/mechanical blow-up or exploded parts view of what you worked? This will have all the parts listed in the order of installement and placement as well...good luck tstex
Any chance that your DW has a float switch and that you hit it during the repairs? It's a plastic pipe with a cap - looks sorta like a mushroom. If you have one try to pull it up just a little - if it gets pushed down it will inhibit the drain cycle.
For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.