I need to make a dry eraser holder to attach to a plate.
Do anyone no how.I don;t want to use velco stuff.Thanks

This message has been edited. Last edited by: Jeanette Stephens,

yes. i would buy some velcro that has a peel an stick on side
cut the velcro with a pair of scissors, attach the velcro to the plate and to the dry eraser. press them together.. walla its stuck to the plate

frodo

Aleene's makes a product called Tack It Over and Over (I think!) I have used it on acrylic blocks and red rubber stamps. but anyway you apply it to what you want to stick, in this case the dry eraser holder-apply every place the holder will touch the plate, it should stick well to the glass. but after applying to the item allow to dry completely. Then stick to the plate and hang up your eraser. It is easy to use and should have a website to check it out on line if you wanted to. I like this product and use to make no pin pins for kids jewelery...it will stick to the kid's shirt or jacket easily but can be pealed off for washing the clothing!
Hope this helps!