DIY Network

All Projects

TV Projects

    What Do You Want To Work On?

      What Activity Do You Want To Do?

        0

        Available Projects

        Get Results

        DIY Network /

        Message Boards

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Windows, Walls & Doors    Door Will Not Remail Slightly Ajar
        Go
        New
        Find
        Notify
        Tools
        Reply
          
        Door Will Not Remail Slightly Ajar Sign In/Join 
        posted
        Please advise on how I can remedy the following -

        Question:
        Our home is only 1 1/2 years old. We used to be able to open the door part way to allow air flow - heating and cooling circulation. Now the door swings open all the way.

        Please advise on how to remedy this situation.

        Choices:
        Adjust the door
        Tighten or shim a hinge plate

         
         
        Posts: 1 | Registered: Jan 02, 2014Reply With QuoteReport This Post
        posted Hide Post
        you can use a shoe as a doorstop to hold it where you want. we use an old sad iron to keep the cats from closing themselves into the bedroom.

        you can put a level on the top of the door to see if it's sagged, if so, replace a screw on the top hinge with a 3-inch screw to bring it back towards level.

        you can put a level on the upright jamb to see if was installed correctly, plumb straight up from top to bottom. if not, you will have to loosen any screws that penetrate the jamb, pry a little, and insert more shims, then renail. this will require cutting the nails on the other side and removing some shims to the door will shut again. it means taking all the decorative trim off both sides and reinstalling it, also.


        sig: if this is a new economy, how come they still want my old-fashioned money?
         
        Posts: 5751 | Location: North Burbs, MN | Registered: Mar 14, 2007Reply With QuoteReport This Post
        Picture of Jaybee
        posted Hide Post
        And the old tried-and-true door trick: Pull one hinge pin. Lay it on something hard like concrete and tap it slightly with a hammer, giving is a very small bend. Then reinstall. The extra friction will keep the door from swinging.


        Jaybee
         
        Posts: 10327 | Location: Knoxville, Tennessee | Registered: Sep 27, 2003Reply With QuoteReport This Post
        posted Hide Post
        If the door isn't binding or dragging and latches, I'd opt for Jaybee's way.


        General Disclaimer

        Any advice given here is general in nature and is not necessarily valid for your given area. If in doubt check with your local codes enforcement department for what is required when doing electrical, plumbing or structural work on your house. Permits may or may not be required in your area and home owners may not be able to DIY some tasks. I have no way of knowing if you have the skills needed to complete the tasks you are asking about, when in doubt seek professional assistance.

        My advice may be worth exactly what you pay me for it. :-) For the record I did not stay in a Holiday Inn Express last night.
         
        Posts: 732 | Location: Cary, NC | Registered: Aug 17, 2006Reply With QuoteReport This Post
          Powered by Social Strata  
         

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Windows, Walls & Doors    Door Will Not Remail Slightly Ajar

        © Scripps Networks 2009

        Advertisement

        Posting Guidelines

        • Please be sure posts are category appropriate.
        • No off-topic or off-color postings.
        • Postings may be deleted at the discretion of DIY moderators.
        • No advertising is allowed.
        • Be nice. No name calling, personal attacks or flaming.
        • Certain words will trigger moderation of the post. These words mostly cover political or religious topics, which are OFF the topics covered by DIY.

        Full Guidelines

        For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.