DIY Network

All Projects

TV Projects

    What Do You Want To Work On?

      What Activity Do You Want To Do?

        0

        Available Projects

        Get Results

        DIY Network /

        Message Boards

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Windows, Walls & Doors    true up framing
        Go
        New
        Find
        Notify
        Tools
        Reply
          
        true up framing Sign In/Join 
        posted
        I am remodeling my house. It used to be lath and plaster walls. I put a 6ft level along the studs and some are lined up but most of the walls wave in and out. I was wondering which would be the better way to true them up. They are load bearing walls. Is it better to remove and replace them one at a time trying to keep them straight or would it be easier to attach a 2x6 to one side of each stud and give more room for running electrical/plumbing and adding sound dampening spray foam insulation.
        Not all the current studs reach from floor to ceiling. Some have a short piece attached to the bottom to complete it.
         
        Posts: 10 | Location: Barryton, MI | Registered: Sep 02, 2013Reply With QuoteReport This Post
        Picture of Jaybee
        posted Hide Post
        If you want a perfectly plumb wall, then you can sister a new stud alongside each of the old studs. Your wall will become a little thicker framed then before but if you are going back with drywall instead of plaster your net result will be a wall of the same thickness.

        Run each new stud full length. Studs can be 2x4. If this is an interior wall that needs straightening on both sides, it will work better to treat each side individually - adding two new studs per existing stud - one to straighten out one side and the other for the second side. Once you set a plumb line on each end of the wall, you can use string or a laser as a guide to align the new studs before nailing them to the old.


        Jaybee
         
        Posts: 10111 | Location: Knoxville, Tennessee | Registered: Sep 27, 2003Reply With QuoteReport This Post
          Powered by Social Strata  
         

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Windows, Walls & Doors    true up framing

        © Scripps Networks 2009

        Advertisement

        Posting Guidelines

        • Please be sure posts are category appropriate.
        • No off-topic or off-color postings.
        • Postings may be deleted at the discretion of DIY moderators.
        • No advertising is allowed.
        • Be nice. No name calling, personal attacks or flaming.
        • Certain words will trigger moderation of the post. These words mostly cover political or religious topics, which are OFF the topics covered by DIY.

        Full Guidelines

        For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.