DIY Network

All Projects

TV Projects

    What Do You Want To Work On?

      What Activity Do You Want To Do?

        0

        Available Projects

        Get Results

        DIY Network /

        Message Boards

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Windows, Walls & Doors    skim coating walls
        Go
        New
        Find
        Notify
        Tools
        Reply
          
        skim coating walls Sign In/Join 
        posted
        I am in the process of removing wallpaper. There are apparently 2 layers of paper with the first layer having been painted. Also, the drywall was not primed first. So, of course, the walls are looking very rough. How is the best way to skim coat these walls? I would like to paint but may end up wallpapering again if they look too bad.

        This message has been edited. Last edited by: Shelleydb,
         
        Posts: 1 | Registered: Sep 26, 2013Reply With QuoteReport This Post
        Picture of Jaybee
        posted Hide Post
        You have one of those projects where there is no easy solution. Skimming 100% of the wall surface takes a lot of time, the moisture in the mud can cause remaining parts of the wall paper to rise and it takes a huge amount of work to get everything smooth. Add to that you have all the dust.

        In many cases is is even easier to completely replace the drywall - it certainly will make for a better end result.

        A third method would be to add a paintable wallpaper liner. Overall this will be the easiest way to get a nice, paintable surface.


        Jaybee
         
        Posts: 10477 | Location: Knoxville, Tennessee | Registered: Sep 27, 2003Reply With QuoteReport This Post
        Picture of Frodo
        posted Hide Post
        as jaybee, suggested. sheetrock over it
        or....skim the wall. after you get all the old paper off of it
        thin your mud with water, the skimming is easy, the hard part is the sanding of the wall after it dries
        a tip...use a brite light to cast shadows on the wall to see the bumps and valleys, wear a face mask, tape all doors closed. dust..sand it till its smooth as a babys butt...
         
        Posts: 4089 | Location: I live in southern mississippi | Registered: Jun 01, 2008Reply With QuoteReport This Post
          Powered by Social Strata  
         

            DIY Message Boards  Hop To Forum Categories  Home Improvement  Hop To Forums  Windows, Walls & Doors    skim coating walls

        © Scripps Networks 2009

        Advertisement

        Posting Guidelines

        • Please be sure posts are category appropriate.
        • No off-topic or off-color postings.
        • Postings may be deleted at the discretion of DIY moderators.
        • No advertising is allowed.
        • Be nice. No name calling, personal attacks or flaming.
        • Certain words will trigger moderation of the post. These words mostly cover political or religious topics, which are OFF the topics covered by DIY.

        Full Guidelines

        For general message board help, click the tab labeled "Tools," and choose "Help" from the dropdown menu.