DIY Message Boards
how do i build a frame for a wall of antique doors?

This topic can be found at:
http://boards.diynetwork.com/eve/forums/a/tpc/f/1491013504/m/4653900177

Jun 02, 2013, 08:24 PM
mcdrewby
how do i build a frame for a wall of antique doors?
I Am Trying To Seperate My Kitchen From MY Living Room By Using Antique Doors. I Am A Beginner And Need To Know How To Build A Frame To Put Them In. Any Suggestions? Thanks!!


Andrew McCoy
Jun 02, 2013, 10:51 PM
Jaybee
"Beginner" and "Finish Carpentry" don't usually go together very well.

If these are going to be operating doors, then you should hire this out to a pro. If the doors are to be used as a fixed wall, then you need to construct a simple box frame with a stop that will allow the doors to be inserted. Here too, the complexity of this can easily get past the beginner stage.


Jaybee
Jun 02, 2013, 11:55 PM
mcdrewby
Thanks Jaybee. These Doors Are Not Going To Be Functional Whatsoever. I Was ThinkIng That I Probably Need To Put them In A Box Frame. I Will Keep This Updated With My Progress. Thanks!


Andrew McCoy